15 Things That Will Always Fail a Home Inspection (and How to Fix Them)

Waiting for home inspection results can be nerve-wracking for both the seller and the buyer. But knowing what parts of a home will fail the test can help alleviate some stress and shock. Whether you’re buying or selling a home, it’s important to be aware of 15 common things that cause a home to fail inspection and what you can do to fix them.

Roofing Issues

A home inspector will look for missing, curling, or crumbling shingles. Depending on its condition, or if your roof is over 20 years old, your inspector might suggest you budget for a new roof, which can cost $25,000 on average to replace. Potential fix: Have a licensed roofing professional perform regular inspections and replace any damaged shingles, as well as make any other necessary repairs.

Weakening Foundation

Signs that you might have a foundation issue include doors that stick, large cracks in the walls, and horizontal cracks in the exterior foundation (this is especially common in homes built over soil with clay in it). Tree roots, improperly constructed second stories, or natural disasters such as earthquakes can also produce cracks in a foundation. Fix: Address foundation issues immediately to avoid a domino effect of other problems. Consult with a structural engineer  to assess any damage and create a repair plan.

Rodent or Insect Infestations

No one wants to buy a home only to deal with hordes of unwelcome pests. Termites, mice, raccoons, and rats can cause all sorts of structural damage (beyond just being gross). Don’t worry; if there’s evidence of foul play, your inspection will note it. Fix: Call a pest control company to check for signs of pest infestations and regularly treat your home as a proactive measure.

Low Water Pressure

An inspector will turn on every plumbing fixture one by one to check the water pressure. If it’s low, they’ll hunt for low-diameter piping, a clogged aerator, or corroded pipes. Did you know your water pressure can also be to high? They’ll mark homes for that, too. Fix: Hire a local plumber to diagnose the problem and make any necessary repairs.

Decaying Attic Insulation

Your home inspector will confirm that your home has the recommended insulation level in the attic, usually between 10 and 14 inches. They will also record any other areas where the insulation is in poor condition. Fix: Have a pro check the health and level of your insulation and replace it if necessary.

Bad Windows

Assume that your home inspector will open and close every window to check for signs of damage, drafts, condensation, and the overall condition of the panes and frame. Fix: If problems are present, hire a local window contractor to repair any obvious damage, add more insulation, or install new ones.

Electrical Issues

When it comes to electrical systems, ungrounded receptacles, exposed light bulbs, double-tapped circuit breakers, and malfunctioning GFCI outlets are all issues a home inspector must note on their report. Fix: Upgrade your receptacles to three-prong outlets, cover all exposed lightbulbs, and make sure outdoor receptacles have bubble covers. Hire an electrician if you suspect there are deeper wiring problems to address.

Poor Drainage

Problems with the surface grading around your home could cause drainage problems and even foundation damage. In addition, surface grading issues can lead to basement leaks, causing mildew and mold. Ideally, your lawn should have a 3% slope away from your home. If not, your inspector will disclose it. Fix: Use topsoil to create an appropriate slope around your house; the ground should drop 2 to 3 inches for every 10 feet you move away from the foundation. Also, check your gutters and downspouts for clogs and signs of deterioration.

Failing Heating System

An aging furnace is a definite red flag for potential buyers. Your inspector will remove the cover of your furnace or heat pump to look for signs of age, mold, and general signs of disregard. They’ll also check for blocked chimneys, damaged heat exchangers, any malfunctioning controls, or exhaust flues that aren’t up to code. Fix: hire an air duct cleaning company  to thoroughly clean your ducts if you suspect there’s mold or built-up debris. Make sure to perform general HVAC maintenance regularly, and if your system is older than 15 years old, consider replacing it.

Rotted Wood

Rotted wood can hide in window sills and under your decking. Your home inspector will use an awl to probe untreated wood and see if any rot is present. Fix: Examine the corners of windows and doors. If necessary, have a contractor remove the rotted wood and replace it with fresh wood.

Interior Leaks or Signs of Moisture

If your inspector notices stains on the walls or ceilings, they will dig deeper into the home’s plumbing to pinpoint a high moisture level, which can indicate a leak. Even if they do not find a troublesome amount of moisture, they might recommend having a professional take a closer look at the leaks. Fix: Hire a plumber to check for any leaking that could signify larger issues elsewhere. Once repaired, paint over any stains for a fresh new look.

Signs of Mold

Signs of leakage also indicate a potential mold issue. Your inspector will use moisture meters or an infrared camera to detect excessive moisture and use their eyes and nose (yes, mold smells) to locate troublesome spots. Fix: Address any leaks quickly, repair your home’s surface grading, and maintain appropriate humidity levels in your home. If mold is present, get it removed and treated by a professional as soon as possible.

Building Code Violations

It’s important that all prior home renovations were done to code. Your inspector may not know all the building codes by heart, but they will look for signs the construction was done improperly, such as handrails that don’t turn and stop at a wall, bathroom exhaust fans that don’t vent outside, or missing deck flashing. Fix: Have a building inspector review any renovations according to codes in your area, and if needed, provide recommended steps for repair.

Malfunctioning Safety Features

The inspector will ensure all safety features such as door locks and carbon monoxide and smoke detectors function properly. Fix: Take a few steps to increase your home security and safety. Replace the locks on windows and doors, replace the batteries in your smoke and carbon monoxide detectors, and review local laws and building codes to ensure you have the number of sensors required for the size of the home.

Harmful and/or Outdated Building Materials

Asbestos is present in many homes built before 1981 in insulation, vinyl flooring, or spray-on surfacing materials. Crumbling insulation in an older home can indicate asbestos. Homes built before 1978 may also have lead paint. 

While most home inspections do not include a lead paint test, you can add it for a fee. Finally, carbon monoxide and radon can leak into your home via broken appliances or foundation cracks; your inspector will likely use a specialty detector to look for high gas levels. Fix: Depending on your home’s age, have a professional examine your home for harmful materials and suggest a remediation plan if needed.

Our Home Inspection Failed—Now What?

If your home inspection was, um…a real eye-opener, consult your real estate agent for advice. They’ll comb over the report details and consider the current market when formulating an action plan.

As a buyer, you have options including:

  • Ask the seller to make repairs.
  • Ask the seller for a credit (consult with contractors first to determine an appropriate amount that will cover the repairs).
  • Submit a lower counteroffer.
  • Move on to other homes if the repairs feel like they are too much to take on.

As a seller, you have options including:

  • Fix the repairs.
  • Offer sellers a repair credit.
  • Sell the home “as is,” although this may require lowering the purchase price of the home.
  • Purchase a one-year home warranty for your buyer, which can cover repairs to HVAC systems, appliances, and some electrical work.

Keep in mind that if a seller decides not to make repairs and the buyer backs out, the seller must disclose the findings when they put the home on the market again.

This article originally appeared on Agni  and is syndicated by Cheapism.

Hot Home Trend: Western Gothic

The Wild West aesthetic adopts moody accents in this up-and-coming design palette. Pinterest has identified “Western Gothic” as a top interior design trend for 2024.

Read More »

Sustainable Spaces: The Bathroom

These eco-friendly bathroom upgrades cut energy costs and help attract today’s sustainability-minded buyers. It may come as no surprise that American households use most of

Read More »